IE工程师英文简历
【简介】感谢网友“方瑜方知几”参与投稿，以下是小编精心整理的IE工程师英文简历（共10篇），仅供参考，希望能够帮助到大家。
篇1：IE工程师英文简历
Name: Mr. R Gender: Male
Wedlock: Single Nation: Han
Residence: Guangdong-Qingyuan Age: 28
Location: Guangdong-Dongguan Height: 173cm
Target Locations: Guangdong
Target Positions: Industry/Factories-Industrial Engineer
Industry/Factories-Production Management Clerk
Industry/Factories-Technic Engineer
Target Jobs: Industrial Engineer、 Lean Engineer
Education
-09 ～ -07 GuangDong University of Technology Industral Engineering Bachelor Degree
Training
-12 ～ 2008-12 Guopei Certificate Internal Quality Auditor Training &Qualification
【company name】 (-07 ～ Present)
Company Type: Private Enterprise Company Category: Electrical,Micro-electronics
Job Title: Industrial Engineer Positions: Industrial Engineer
Job Description: 1.NPI: process planning, fixture and equipment planning, prepare process checklist
2.Standard time and capacity evaluation, line balance and prepare SOP for new products
3.Maintain the usage of the consumptive material, standard time and capacity
4.Perform line balance and improve process to rise capacity
5.Design and improve the tools and fixture in the work site
6.Monitor the efficiency of the production line, analyze these reasons manpower, machine, material , environment, method, push the relative dept to solve issues
7.Kaizen project planning and push: Auto-machine introduce, production way optimize, manpower and material saving, etc
Career Highlight:
1.Auto-welding machine introduce: welding process operator saving(16 operators-12 operators=4 operators), line balance rate upgrade from 83% to 91%, solder wire saving 3.2grams, cost of solder wire saving 1.6 yuan RMB for each PCBA.
2.Auto-packaging production line planning and implement: master carton packaging operator saving, every production line deploy 2 packaging operators for 8 lines, after introduce the new equipment it takes only 5 operator to seal the master carton
3.Rear cabinet pre-process and final assembly combine: manpower saving include 1 conveyer, 1 visual inspector, 1 loading operator and 1unloading operator(total 4 operators), and saving the usage of bubble bag and partition board
4.Decorative plate incoming package improvement: change the package material and simplify package way to reduce pack cost(from 0.13yuan to 0.09yuan RMB) and cut down unpack operation time( saving 12 seconds)
5.Cooperate with RD to change PCBA process from dispensing process to solder paste process, in order to cut down welding failure rate after wave-soldering. In this case charge of PCBA fixture design and improvement evaluation(repairing welding time 140sec reduce to 70sec,4 repair welding operators cut down to 2 operators)
6.According to the small order quantity of the product, study the less humanizing process for small products to reduce the change over loss time(38 operators*30minute-
20 operator*40minutes=340minutes) and improve 8% of the motion effective rate
Reason for Leaving: Not very good economic benifit of the company,little chance to promote both in position and welfare
【company name】 (2009-07 ～ 2011-06)
Company Type: Joint Venture Company Category: Electrical,Micro-electronics
Job Title: Junior Engineer Positions: Industrial Engineer
Job Description: 1.Establish and maintain the standard labor time, perform line balance to improve production capacity
2.Load capacity assessment: Base on the MPS and the capacity of production line to forecast the workforce requirement
3.Prepare the cost study report for new products, labor rate evaluate basis on factory operating cost, provide quotation to customer for special process
4.Prepare the workshop layout and line layout design basis on logistics analysis
5.Research and develop new packaging method, develop new suppliers for packing material, make order for new packing material and follow up the schedule
6.Deal with customer complaint and settle products packaging issue, improve packaging method to satisfy customer
Career Highlight:
1. Function test man-machine operation improvement: cooperate with TE to disassemble
and rearrange test item, and modify the way of program display in the monitor, in order
to realize one person simultaneously operate two test machine
2. Line balance improvement: provide the cycle time of each model to set up assemble line speed, and upgrade the line balance rate to 80% above for all model
Reason for Leaving: Not a very good department to pratice and learn IE skill,seek more chance to enhance myself
Special Skills
Professional Title:
Computer Level: national computer exam. grade 3
Computer Skills: 1.Be familiar with Windows，be good at Microsoft office software;
2.Have passed National Computer Rank Exam of database technology ;
3.Mastery in Auto CAD of computer aided design software;
Strengths: 1.Be familiar with method study and standard time measurement, know well about Work study technology including 5W1H inquire skill and ECRS four principles
2.Mastery in IE seven techniques, comprehend production management essentials
And the activity about 5S.
3.Be familiar with logistics analysis during the production process, be capable of
Facility planning and machine layout
4.Know about the basis quality management tools, such as Seven QC Methods and FMEA technique
Language Skills
Chinese: Good Cantonese: Good
English Level: CET-4
English: Good
Career Objective
Career Direction: A position as IE engineer or Lean engineer which will use the IE concept and lean production to reduce the cost of enterprise running ,promote the competitive strength,as a result to achieve the win-win target with enterprise.
Requirements:
Self Info.
Self Assessment: 1.Bachelor degree in Industrial Engineering, have good sense in cost down, and have successful case of improvement
2.Worked in Taiwan electronic company for almost two year, be familiar with SMT, DIP, repair welding, final assembly, test and packing process
3.Strong hands-on skills, have experience in guiding operation for new production first MP
4.Good skill in Auto-CAD, can design and make fixture in the workshop
5.Good communication and organization skill in working with other department, have some experience in training
6.Responsibility for work and a man of great loyalty, able to learn, patient and positive.
英文简历相关
篇2：IE工程师英文简历
Name: Mr. R Gender: Male
Wedlock: Single Nation: Han
Residence: Guangdong-Qingyuan Age: 28
Location: Guangdong-Dongguan Height: 173cm
Target Locations: Guangdong
Target Positions: Industry/Factories-Industrial Engineer
Industry/Factories-Production Management Clerk
Industry/Factories-Technic Engineer
Target Jobs: Industrial Engineer、 Lean Engineer
Education
2005-09 ～ 2009-07 GuangDong University of Technology Industral Engineering Bachelor Degree
Training
2008-12 ～ 2008-12 Guopei Certificate Internal Quality Auditor Training &Qualification
【company name】 (2011-07 ～ Present)
Company Type: Private Enterprise Company Category: Electrical,Micro-electronics
Job Title: Industrial Engineer Positions: Industrial Engineer
Job Description: 1.NPI: process planning, fixture and equipment planning, prepare process checklist
2.Standard time and capacity evaluation, line balance and prepare SOP for new products
3.Maintain the usage of the consumptive material, standard time and capacity
4.Perform line balance and improve process to rise capacity
5.Design and improve the tools and fixture in the work site
6.Monitor the efficiency of the production line, analyze these reasons manpower, machine, material , environment, method, push the relative dept to solve issues
7.Kaizen project planning and push: Auto-machine introduce, production way optimize, manpower and material saving, etc
Career Highlight:
1.Auto-welding machine introduce: welding process operator saving(16 operators-12 operators=4 operators), line balance rate upgrade from 83% to 91%, solder wire saving 3.2grams, cost of solder wire saving 1.6 yuan RMB for each PCBA.
2.Auto-packaging production line planning and implement: master carton packaging operator saving, every production line deploy 2 packaging operators for 8 lines, after introduce the new equipment it takes only 5 operator to seal the master carton
3.Rear cabinet pre-process and final assembly combine: manpower saving include 1 conveyer, 1 visual inspector, 1 loading operator and 1unloading operator(total 4 operators), and saving the usage of bubble bag and partition board
4.Decorative plate incoming package improvement: change the package material and simplify package way to reduce pack cost(from 0.13yuan to 0.09yuan RMB) and cut down unpack operation time( saving 12 seconds)
5.Cooperate with RD to change PCBA process from dispensing process to solder paste process, in order to cut down welding failure rate after wave-soldering. In this case charge of PCBA fixture design and improvement evaluation(repairing welding time 140sec reduce to 70sec,4 repair welding operators cut down to 2 operators)
6.According to the small order quantity of the product, study the less humanizing process for small products to reduce the change over loss time(38 operators*30minute-
20 operator*40minutes=340minutes) and improve 8% of the motion effective rate
Reason for Leaving: Not very good economic benifit of the company,little chance to promote both in position and welfare
【company name】 (2009-07 ～ 2011-06)
Company Type: Joint Venture Company Category: Electrical,Micro-electronics
Job Title: Junior Engineer Positions: Industrial Engineer
Job Description: 1.Establish and maintain the standard labor time, perform line balance to improve production capacity
2.Load capacity assessment: Base on the MPS and the capacity of production line to forecast the workforce requirement
3.Prepare the cost study report for new products, labor rate evaluate basis on factory operating cost, provide quotation to customer for special process
4.Prepare the workshop layout and line layout design basis on logistics analysis
5.Research and develop new packaging method, develop new suppliers for packing material, make order for new packing material and follow up the schedule
6.Deal with customer complaint and settle products packaging issue, improve packaging method to satisfy customer
Career Highlight:
1. Function test man-machine operation improvement: cooperate with TE to disassemble
and rearrange test item, and modify the way of program display in the monitor, in order
to realize one person simultaneously operate two test machine
2. Line balance improvement: provide the cycle time of each model to set up assemble line speed, and upgrade the line balance rate to 80% above for all model
Reason for Leaving: Not a very good department to pratice and learn IE skill,seek more chance to enhance myself
Special Skills
Professional Title:
Computer Level: national computer exam. grade 3
Computer Skills: 1.Be familiar with Windows，be good at Microsoft office software;
2.Have passed National Computer Rank Exam of database technology ;
3.Mastery in Auto CAD of computer aided design software;
Strengths: 1.Be familiar with method study and standard time measurement, know well about Work study technology including 5W1H inquire skill and ECRS four principles
2.Mastery in IE seven techniques, comprehend production management essentials
And the activity about 5S.
3.Be familiar with logistics analysis during the production process, be capable of
Facility planning and machine layout
4.Know about the basis quality management tools, such as Seven QC Methods and FMEA technique
Language Skills
Chinese: Good Cantonese: Good
English Level: CET-4
English: Good
Career Objective
Career Direction: A position as IE engineer or Lean engineer which will use the IE concept and lean production to reduce the cost of enterprise running ,promote the competitive strength,as a result to achieve the win-win target with enterprise.
Requirements:
Self Info.
Self Assessment: 1.Bachelor degree in Industrial Engineering, have good sense in cost down, and have successful case of improvement
2.Worked in Taiwan electronic company for almost two year, be familiar with SMT, DIP, repair welding, final assembly, test and packing process
3.Strong hands-on skills, have experience in guiding operation for new production first MP
4.Good skill in Auto-CAD, can design and make fixture in the workshop
5.Good communication and organization skill in working with other department, have some experience in training
6.Responsibility for work and a man of great loyalty, able to learn, patient and positive.
篇3：IE助理工程师英文简历
Name: Ms. E Gender: Female
Wedlock: Single Nation: Han
Residence: Hubei-Huanggang Age: 27
Location: Guangdong-Zhongshan Height: 162cm
Target Locations: Guangdong-Dongguan、 Guangdong-Shenzhen
Target Positions: Industry/Factories-Mechanical Engineer
Industry/Factories-Materials and Equipment Assistant
Industry/Factories-Services Engineer
Target Jobs: PMC、 Assistant Engineer
Desired Salary: Negotiable Apartment needed
Education
-09 ～ -07 Changjiang Vocational College Applied English Junior College
-09 ～ 2006-07 Yin Shan High shcool Integrated curriculum High School
【company name】 (2009-02 ～ -02)
Company Type: Foreign Enterprise Company Category: Machine-building,Machine,Heavy industry
Job Title: ME Assistant Engineer Positions:
Job Description: 1. collate customer Ministry to the BOM, download system placed BOM, then finishing our BOM and compare the customer to verify client systems in the BOM is correct,We are on the correct BOM SAP system to establish their own internal version of then assigned to send to Hong Kong, then we want to create Routing, check ensure that no Wrong.
2. According to the right we have to make the product BOM WI to accurate, they often patrol lines, unusual or improper operation staff,We want to give them time operational guidance, we want to point anomaly.Analysis, determine the most effective way to correct.
3. regularly updated NPI stage of the product, we need to do on the new product introduction time, people Staff, materials, use of projections, in the shortest time reduce the human, material cost of the product consumption.
4. the use of CAD mapping, CAD drawing drawing the most accurate tool for suppliers to buy Cartons, labels, most of us use the CAD produced, including its size, Material would have to precise, CAD and there were precise scale.
5. to do some single-purchase price, of course, there are many single-purchase price, I took a for instance, We just need to do a good job within the company's monthly consumer accounts, the customer we will According to their NRE FORM PO to fill the financial reconciliation to the charge related to the customer Costs.
Reason for Leaving: Poor environment
【company name】 (-03 ～ 2008-11)
Company Type: Foreign Enterprise Company Category: Machine-building,Machine,Heavy industry
Job Title: Logistics Merchandiser Positions:
Job Description: Tracking of goods production, before shipping of all products and services of the production and communication, development of delivery plans, booked travel, shipping good customs, quarantine information, the first time after the product shipped. Well after shipment invoices, packing lists, bills of lading and other credit documents to ensure data integrity and accuracy.
Reason for Leaving: Lower wages, end of the internship for school.
Project Experience
Microgen Engine Corporation (2011-04 ～ Present)
Job Title: Assistant Industry Engineer
Project Description: New test for the tracking, production scheduling pull, abnormal production line analysis and processing, production manufacturing work instructions.
Responsibility: .
Special Skills
Professional Title:
Computer Level: senior
Computer Skills: Good at analyzing problems.Will lead the group, like delving into the heart of the skills and methods of doing things.Can be skilled with office software, basic CAD drawing plans
Strengths: Good at analyzing problems.Will lead the group, like delving into the heart of the skills and methods of doing things.Can be skilled with office software, basic CAD drawing plans
Language Skills
Chinese: Cantonese:
English Level: Majored in English CET-4
English: Good
Career Objective
Career Direction: Find the environment, good corporate salary, to do their own work, I believe there must be paid by return.
Requirements: Free room and board, buy endowment insurance and housing fund.
Self Info.
Self Assessment: Lively and cheerful, good length and communication skills, self
motivated.
英文简历相关
篇4：ie工程师岗位职责范本
1、按产品型号和组装特性制定科学准确的标准工时，并根据阶段进行修改;
2、及时制定产线需要的作业指导书等工艺文件，并确保及时，准确，并跟进生产拉线实际执行文件内容;
3、对车间、拉线等进行科学合理的规划，以提高工作效率和出货直通率;
4、对组装工序不断进行优化，提高平衡率，提升组装效率;
5、组织产线品质异常分析与处理，跟进异常解决措施的结果，确保下次生产正常;
篇5：ie工程师岗位职责范本
1、协助对样品进行验证，并提出改善意见;
2、参与新产品试产，主持新产品试产会议，检讨试产中出现的问题点给出有效改善措施，并跟进改善结果;
3、对维修技术员的报表进行分析，并提出改善意见;
4、上级布置的临时任务工作。
篇6：ie工程师岗位职责范本
1、负责组织部门团队建设、不断提高员工士气、组织部门内员工培训和员工技能提升;
2、建设IE梯队，内部编制规划;
3、负责组织效率改善(标准工时、人力配置，人力设备优化、生产流程优化、车间布局优化)。
ie工程师岗位职责
篇7：ie工程师岗位职责范本
1、人员管理,职责分工,流程优化,标准建立,业绩考核改善;
2、制订完整部现场IE改善的行动计划，并负责执行和推广;改善评估及改善绩效审核;
3、资源统筹规划:车间布局,生产资源统筹;
篇8：IE工程师个人简历
SOP的制作及维护;
生产工时的评定;
生产线平衡改善;
新产品下线跟踪及问题反馈;
生产辅助夹具的设计;
多能工的培训;
协助公司开展7S活动;
协助高层就精益生产的方针管理进行展开;
对各个部门精益生产理念和工具的支持等
离职原因： 求成长
**公司 (-05 ～ -12)
公司性质： 私营企业 行业类别： 教育、培训
担任职位： 岗位类别： 销售助理
工作描述： 工作职责：
进行制造业公开课客户的开发、维护，并完成业绩目标;
负责海外研修课程全国客户的开发、跟踪及维护;
不定期对团队成员进行销售及心态方面的培训;
负责分公司的网络维护、分公司各种活动的PPT制作及回放;
负责组织员工对每次新课程的内容及讲师背景进行培训;
培训、引导新员工、有针对性培养储备人才;
11月份分公司举办“白云杯”登山比赛，带领小组获取第一名;
4月份 公司上海总部举办4周年庆典，代表分公司参加演出“三句半”节目并获得好评;
206月份分公司组织火炉山“六月狂欢”拓展活动带领小组获取总分第一名;
工作总结：
在这家公司接触了很多经过整合的先进的理念、管理方法、做人做事的原则;
尤其锻炼了我的沟通表达和团队组织能力;
因为该公司专注于制造业企业培训，所以在职期间对制造业企业的现场改善有了深刻的认识、初步了解8大浪费、5S、再到精益生产，了解日本丰田的先进管理方式以及在TPS管理方式下形成的企业文化;
了解很多优秀企业能够持续发展的原因;
接触的客户都是企业中高层，他们的职业涵养及为人处世方式都深深影响了我;
对制造业企业和服务型企业管理的共通性有一定的认识;
离职原因： 到莞谋发展
技能专长
专业职称：
计算机水平： 初级
计算机详细技能： OFFICE应用 POHTOSHOP
技能专长： 一年团队管理经验;
一年精益生产理念学习经验;
多次专案推动经验。
语言能力
普通话： 流利 粤语： 一般
英语水平： 一般
求职意向
发展方向： 有一定的团队组建及管理经验;
擅长方针管理展开相关工作;
车载播放器、开关电源、LED电源等生产工艺。
其他要求：
自身情况
自我评价： 本人性格沉稳、乐观向上、好学、团结、乐于助人，喜欢挑战自我，具有较强的洞察、分析、总结能力，良好的沟通及表达能力，强烈的团队协作意识。
兴趣爱好： 推理片、战争片、台球、羽毛球、自行车、爬山、唱k
篇9：ie工程师自我介绍
Good morning. It's a pleasure for me present myself. My name is xx, and I am a candidate for the position of Operation Industrial Engineer
As a student, I have taken many courses in subjects such as Ergonomic Time Study, Plant Layout and Material Handling, Occupational Safety and Health Administration, Computer Aided Design, and Technical Writing. Th
I am fortunate to have had the chance to apply my studies while working as an intern at Pratt & Whitney where I was involved in the redesign of the plant Blade Outer Air seal cell layout. Thank you for your time and consideration. ese courses have exposed me to the theories required for process engineering. I believe I can leverage my background to make many contributions to the United State Postal Service and would like to be considered for the following locations: Scarborough, Manchester, Springfield, Hartford, Providence, Albany, and Buffalo. Please let me know if you need additional information, I can be reached at xxxxxxxx. As an intern I was responsible for:Observing and recording the time required for project tasksCreating a percent loading chart to compare an operator's actual task cycle time to Take TimeProducing an operations bar chart to identify the capacity of operations and the placement of standard work in process to maintain part flowConducting capacity analysis to identify bottlenecks, areas of excess capacity and possible target areas for improvement Demonstrating the maximum capacity of each machine and determining the number of workers neededProducing a standard work sheet to graphically show the standard flow of man, materials and machines in the work area.
篇10：IE工程师个人简历
基本信息
姓 名： 黄先生 性 别： 男
婚姻状况： 未婚 民 族： 汉族
户 籍： 广西-梧州 年 龄： 29
现所在地： 广东-东莞 身 高： 170cm
希望地区： 广东-东莞、 广东-深圳、 广东-广州
希望岗位： 工业/工厂类-IE/工业工程师
寻求职位： IE工程师、 精益生产工程师、 精益生产专员
教育经历
20xx-09 ～ 20xx-07 广西生态工程职业技术学院 生物技术应用 大专
**公司 (20xx-09 ～ 20xx-04)
公司性质： 私营企业 行业类别： 电力、电气、水利
担任职位： IE工程师 岗位类别： IE/工业工程师
工作描述： 职责：
1、确定作业标准，标准工时，维护标准工时库，产能及人力需要评估;
2、制品工程的规划与设计，工装、夹具的需求与设计方案提出;
3、保证产线平衡率达标，制程维护与改善，有计划地提升产能;
4、协力厂商制程能力评审与辅导;
5、主导工艺改善，处理生产线日常问题，判定延误工时;
6、产品各流程分析，FLOW CHART，SOP制作与重工流程;
7、辅料样品确认，准确计量辅料用量，出辅料用量，出辅料用量BOM;
8、熟悉焊接技术与电源制造流程;
9、参加相关部门主导的产品质量分析会，以保证原因分析准确性及改善方案的可行性;
10、对产品实现过程的各阶段各种报表进行分析，提出制程改善方案，并及时准确反馈给相关部门;
11、参与LED电源新产品评审、试产、量产，新产品报价，正常生产跟踪、反馈、改善。
项目一：20xx年9月-11月，针对出英国BT电源成立外观改善专案小组，组织生产、品管、物控进行为期3个月定期检查、总结、执行、计划的循环管理，使得产品外观不良率从20%下降到7%;
项目二：20xx年9月份，针对某出省内龙头照明LED电源产能评估、分析、改善、维护，时产能从300PPH提升至550PPH;
项目三：20xx年11月份，主导手加工计件工时工价建立，以及完善，在人力成本趋高背景下，很大程度提高员工工作积极性。
总结：
1、在职期间，能很好处理与上司、本部门同事及外部门同事之间的关系，在融洽的工作氛围中更好地开展工作;
2、大量的日常品质异常处理工作、锻炼敏捷的分析、总结、沟通、执行能力;
3、合理安排工作时间，在完成日常工作情况下，按期完成上司交代的临时任务，并定期汇报工作直至CLOSE。
离职原因： 换个空间
**公司 (20xx-04 ～ 20xx-06)
公司性质： 外资企业 行业类别： 电子、微电子技术、集成电路
担任职位： 高级IE 岗位类别： IE/工业工程师
工作描述： 工作描述：
生产工艺的跟踪及处理;
SOP的制作及维护;
生产工时的评定;
生产线平衡改善;
新产品下线跟踪及问题反馈;
生产辅助夹具的设计;
多能工的培训;
协助公司开展7S活动;
协助高层就精益生产的方针管理进行展开;
对各个部门精益生产理念和工具的支持等
离职原因： 求成长
**公司 (20xx-05 ～ 20xx-12)
公司性质： 私营企业 行业类别： 教育、培训
担任职位： 岗位类别： 销售助理
工作描述： 工作职责：
进行制造业公开课客户的开发、维护，并完成业绩目标;
负责海外研修课程全国客户的开发、跟踪及维护;
不定期对团队成员进行销售及心态方面的培训;
负责分公司的网络维护、分公司各种活动的PPT制作及回放;
负责组织员工对每次新课程的内容及讲师背景进行培训;
培训、引导新员工、有针对性培养储备人才;
20xx年11月份分公司举办“白云杯”登山比赛，带领小组获取第一名;
20xx年4月份 公司上海总部举办4周年庆典，代表分公司参加演出“三句半”节目并获得好评;
20xx年6月份分公司组织火炉山“六月狂欢”拓展活动带领小组获取总分第一名;
工作总结：
在这家公司接触了很多经过整合的先进的理念、管理方法、做人做事的原则;
尤其锻炼了我的沟通表达和团队组织能力;
因为该公司专注于制造业企业培训，所以在职期间对制造业企业的现场改善有了深刻的认识、初步了解8大浪费、5S、再到精益生产，了解日本丰田的先进管理方式以及在TPS管理方式下形成的企业文化;
了解很多优秀企业能够持续发展的原因;
接触的客户都是企业中高层，他们的职业涵养及为人处世方式都深深影响了我;
对制造业企业和服务型企业管理的共通性有一定的认识;
离职原因： 到莞谋发展
技能专长
专业职称：
计算机水平： 初级
计算机详细技能： OFFICE应用 POHTOSHOP
技能专长： 一年团队管理经验;
一年精益生产理念学习经验;
多次专案推动经验。
语言能力
普通话： 流利 粤语： 一般
英语水平： 一般
求职意向
发展方向： 有一定的团队组建及管理经验;
擅长方针管理展开相关工作;
车载播放器、开关电源、LED电源等生产工艺。
其他要求：
自身情况
自我评价：
本人性格沉稳、乐观向上、好学、团结、乐于助人，喜欢挑战自我，具有较强的洞察、分析、总结能力，良好的沟通及表达能力，强烈的团队协作意识。
兴趣爱好： 推理片、战争片、台球、羽毛球、自行车、爬山、唱k
